Our bending equipment is represented by a press Brake type MB8-110T / 2500. The machine is equipped with a set of dies and punches for bending smooth and corrugated sheets of carbon, alloy and stainless steels.
The main characteristics of the press brake:- The maximum bending force is 110 tons.
- The maximum bending thickness is 5 mm, for a stainless steel workpiece, length 1200 mm.
- The maximum bending length is 2500 mm, for a stainless steel workpiece, 3 mm thick, 2500 mm long.
- The minimum length of the workpiece (Lz) and the minimum shelf size (Lp), which can be obtained with one bend, depend on the thickness of the metal, and are:
- For metal with a thickness of 0.5 mm to 2.5 mm; Lz = 24 mm, Lp = 12 mm.
- For metal with a thickness of 2.5 mm to 4 mm; Lz = 30 mm, Lp = 15 mm.
- For metal with a thickness of 4 mm to 5 mm; Lz = 45 mm, Lp = 27 mm.
- The referenced dimensions are valid only for the case when one bend is enough to create the product.
- Types of workpiece material: stainless, carbon and alloy sheet steel, smooth and corrugated, 4 mm thick wire.
The MB8-110T / 2500 press brake has 4 axes controlled by the CNC: the Y1 and Y2 axes controlling the hydraulic cylinders and, respectively, the crosshead, the X axis responsible for the horizontal movement of the rear finger stops, the R axis responsible for the vertical movement of the rear finger stops. The machine is equipped with a system for compensating the deflection of the frame. CNC bending press allows you to build a drawing, automatically calculate the parameters of the bend, has a flexible configuration of the working tool.